Important Of Having IP Camera Bandwidth Calculator

 IP Camera Bandwidth Calculator

An IP camera bandwidth calculator application will allow users to ascertain easily, quickly and accurately the storage and data transfer requirements for video surveillance systems.

In the following paragraphs, you can learn more about IP Camera Storage Calculators and discover why you should use them on your iPhone.

When you want to quickly calculate the amount of PC/Server space needed and your network bandwidth, you can fast type in the camera count; select the video codec; data compression level as well as the number of days to save the video.

After this, the IP camera storage calculator will compute the requirements.

You could email or send this information in an SMS Text.

This will be the ideal tool for integrators, installers, salespeople, and manufacturers, eliminating the need for a laptop or computer.

The design for the IP camera system could be very different from the traditional method.

The following are some key areas to pay attention to whenever you are installing a new IP camera system.

It is essential to start with the overall plan for this new system to guarantee a successful installation.

Know the limitation on distance For traditional methods; the coaxial cable can be easily pulled upwards to 1,000 feet away from the camera to record equipment effortlessly.

When it comes to IP cameras, this will limit you to just 100 meters or perhaps 300 feet.

To get this done on smaller buildings, it’s not always an issue, but it could be challenging for larger buildings.

The first step is to put the cameras in the right locations, but the IP camera system will need IDF or Intermediate Distribution Frame locations.

The IDF is network switches that are placed throughout a building and would link network traffic to an MDF or Master Distribution Frame.

This MDF is the server room where the NVR or the Network Video Recorder will be located.

Important Of Having IP Camera Bandwidth Calculator

With the IDF placed in strategic locations, this will make it easier for scalability and possible expansions on the system in the future.

Calculating the requirements for storage Megapixel cameras often mean large storage requirements.

Based on the compression technology utilized to store the video, this could significantly change your requirements for storage.

With IP camera storage calculators, you can quickly determine how much storage is required for the system. You need the following information to use this tool:

  • The estimated frame size for each image and also the type of compression to use
  • The number of frames per second to be recorded
  • The length of time to store or perhaps archive the videos
  • The estimated motion activity to be recorded daily
  • The amount of cameras the system has installed

Entering this data into the calculator will provide you with the amount of storage needed by the system.

Remember that when you add cameras to this system, your room will be reduced.

Therefore, it’s best to make it easy for storage expansion in the future.

When designing an IP camera system, it can be quite different from a traditional system.

Below are five key areas to focus on when laying out your new IP camera system.

Starting out with an overall plan for your new IP camera system is critical to the overall success of the project.

Using the five essential factors of success that are described below will help you to achieve a successful IP camera system installation.

Calculate your storage requirements – Megapixel cameras can mean significant storage needs.

Depending on the compression technology used to store the video can drastically change your storage requirements.

These are storage calculators that determine the amount of storage required for a camera system.

Using these calculators requires you to have the following information:

Using these calculators requires you to have the following information:

  1. a) The approximate frame size of each image and the compression type used.
  2. b) The number of frames per second you are going to record.
  3. c) The number of days that you need to store or archive the video.
  4. d) The approximate percentage of motion activity the camera will record in a day.
  5. e) Number of cameras that the system will have installed.

Inputting this information into the calculator will then give you the amount of storage that will be required by the system.

Always remember that as you add cameras to the system, your storage retention will be decreased.

Allow room for future storage expansion as you add additional cameras.

Considering the above five critical areas when designing your new IP camera system will help ensure that you have a properly designed system.

Remember to consider future expansion and scalability of the system, network bandwidth requirements, and allow for future technology that may not exist yet.

IP camera systems require planning ahead. Using the information above during your security planning stages will help ensure a successful installation.

Recent Posts

link to

How to Select the Best Security Camera Powered by Solar If you want to monitor your home remotely from any location, a solar powered security camera may be just what's needed. These devices use...