Security Cameras Drawing


Security cameras drawing Overview

Step 1: Materials or products required for this job

Materials and tools needed for this task consist of a computer, printer (can be a 3D printer if available in the workforce), blank paper, security cameras drawing template, and some tape.

Tools that can help complete this task faster consist of cutter/boxcutter, ruler, pencils/marker pens (a set of included colors such as black and red).

It is advised to print out more than one copy if multiple security camera drawings need to be made. This is so all steps are followed accurately without missing any step. Furthermore, it makes finishing up sooner rather than later.

Step 2: How to do this job (step by step) without missing any step

Print out the security camera drawing template or draw it on a piece of paper.

Place this drawing up against the blank sheet and align to make sure that they are perfectly aligned.

Use a ruler and pencil to trace over the outline of the camera itself and its housing (the part surrounding the camera.) Use different colors for each pencil lead used; black outlines, red lines inside, etc..

Make sure not to forget details such as screws/bolts/lens caps/external wiring…etc…

After reaching the final stages of filling in all shapes with lines as shown in the diagram, go over those lines again with heavier pressure so it is easier to cut through them after. Use assembly drawing as a reference for wiring and such.

Step 3: Make sure to include some important tips, tricks, and warnings if any about the job after step by step guide.

It is advised to print out more than one copy of the security camera drawings template so all steps are followed accurately without missing any step. Furthermore, it makes finishing up sooner rather than later.

Be mindful of where you place your hands/fingers while cutting around them with a cutter or boxcutter; they will be close to the blade!

The closer something is towards the edge of a blade while cutting it with an object such as cutter/boxcutter, the smoother/cleaner it will come out when cut out..

Step 4:

After completing this task successfully, the citizen should feel accomplished and proud.

The job is complete with the security camera drawings done! It was a little tedious to do especially on some of the finer details but all in all, came out great.

If one likes drawing, these sorts of jobs might be for them. These tasks can be completed by anyone so long as they follow step-by-step guides correctly and carefully..

-Materials required:

Computer, printer (3D-printer), blank paper, security cameras drawing template, some tape.

Tools that can help complete this task faster consist of cutter/boxcutter, ruler pencils/marker pens (a set of included colors such as black and red), and a straight edge like a piece of metal or sturdy plastic instead of using a ruler..

Step by step guide:

1) Print out the security camera drawings template or draw it on a piece of paper.

2) Place this drawing up against the blank sheet and align to make sure that they are perfectly aligned.

3) Use a ruler and pencil to trace over the outline of the camera itself and its housing (the part surrounding the camera.) Use different colors for each pencil lead used; black outlines, red lines inside, etc..

4) Make sure not to forget details such as screws/bolts/lens caps/external wiring…etc…

5) After reaching the final stages of filling in all shapes with lines as shown in the diagram, go over those lines again with heavier pressure so it is easier to cut through them after.

6)Use assembly drawing as a reference for wiring and such.

Important tips/tricks:

-Print out more than one copy of the security cameras drawing template so all steps are followed accurately without missing any step. Furthermore, it makes finishing up sooner rather than later.

-Be mindful of where you place your hands/fingers while cutting around them with a cutter or boxcutter; they will be close to the blade!

-The closer something is towards the edge of a blade while cutting it with an object such as cutter/boxcutter, the smoother/cleaner it will come out when cut out..

-Warnings: It’s advised to print out more than one copy of the security camera drawings template so all steps are followed accurately without missing any step. Furthermore, it makes finishing up sooner rather than later.

Be mindful of where you place your hands/fingers while cutting around them with a cutter or boxcutter; they will be close to the blade! The closer something is towards the edge of a blade while cutting it with an object such as cutter/boxcutter, the smoother/cleaner it will come out when cut out..

Conclusion:

After completing this task successfully, the citizen should feel accomplished and proud. The job is complete with the security camera drawings done!

It was a little tedious to do especially on some of the finer details but all in all, came out great. If one likes drawing, these sorts of jobs might be for them.

These tasks can be completed by anyone so long as they follow step-by-step guides correctly and carefully.

Recent Posts